ODS-FREE PORTABLE HAND-HELD FIRE EXTINGUISHERS

Revision Date: 11/03   The information in the data sheet does not change. This data sheet will not be updated.
Process Code: Navy/Marines: SER-006-99; Air Force: SV09; Army: N/A
Usage List: Navy: High; Marines: High; Army: High; Air Force: High
Alternative For: Halon fire extinguishers
Compliance Impact: Low
Applicable EPCRA Targeted Constituents and CAS Numbers: Bromochlorodifluoromethane (CAS: 353-59-3) and Bromotrifluoromethane (CAS: 75-63-8)

Overview:

Portable hand-held halon fire extinguishers have been one of the standard types of fire extinguishers in common use. However, halon is an ozone-depleting substance (ODS), and on December 31, 1993, halon production was eliminated in the US because of its contributions to ozone depletion. An ODS-free substitute must be found to replace halon units. Halon 1211 and 1301 are still approved for use, but only in mission-critical applications.

Since January 1993, joint service personnel have been banned from purchasing halons, but not the use of existing halon systems. Non-mission-critical halon applications require the use of a substitute and then conversion from the halon-based system. For example, Halon 1301 is used in aircraft simulators, but those non-mission-critical systems must eventually be modified to use an alternate fire extinguishing agent in accordance with current joint service policy. To purchase new halon equipment, senior acquisition official approval must be granted. Furthermore, many automatically activated halon extinguishing systems have been deactivated and can now only be triggered manually. In the event of a discharge, the systems are not to be recharged with halon. The onboard systems will be replaced when an acceptable substitute is available. Some alternate fire suppression agents for use as a substitute for Halon 1301 have been identified and are being used in the services. Halon 1301 is a widely used fire suppression and explosion protection agent applied in the total flooding manner.

The majority of Halon 1211 portable fire extinguishers found inside buildings can be replaced with dry chemical extinguishers and/or carbon dioxide extinguishers. However, research and implementation is still ongoing to identify replacements for Halon 1211 extinguishers used in many weapon system/specialty applications (aviation, air-cushion vehicles, command and control spaces, etc.). In some cases, Halon 1211 in these other applications is being replaced by dry chemical blends such as Cold FireTM, and/or carbon dioxide extinguishers. In other applications, alternative halocarbon agents such as HFC-227ea and HFC-236fa are being evaluated as alternatives.

Halon 1211 and 1301 for use in mission critical applications is supplied by DLA from the Defense ODS Reserve. Procurements of Halon 1211 and 1301 for any other uses requires a certification by an authorized technical representative (ATR) and approval by a senior acquisition official (SAO) at the flag/general officer or civilian SES level in accordance with Section 326 of the FY-93 Defense Authorization Act. Furthermore, excess Halon 1211 and 1301 removed from non-mission-critical applications should be returned to the Defense ODS Reserve in accordance with Service procedures. Further information on return procedures can be obtained from Defense Supply Center, Richmond at (804) 279-4525/5203.


Compliance Benefit:

Use of ODS-free, hand-held fire extinguishers will help facilities meet the requirements under 40 CFR 82, Subpart D and Executive Order 13148 requiring federal agencies to maximize the procurement and use of safe alternatives to Class I and Class II ozone-depleting substances. In addition, the elimination of ODS fire extinguishers at the facility decreases the possibility that the facility would meet any of the reporting thresholds for ODSs under 40 CFR 370. Chemicals used as substitutions should be reviewed for SARA-reporting issues.

The compliance benefits listed here are only meant to be used as general guidelines and are not meant to be strictly interpreted. Actual compliance benefits will vary depending on the factors involved, e.g., the amount of workload involved.


Materials Compatibility:

Prior to replacing any halon system, the impact on the hardware should be evaluated. An engineer who is experienced in fire protection system design should be consulted.


Safety and Health:

Consult your local industrial health specialist, your local health and safety personnel, and the appropriate MSDS prior to implementing any of these technologies.


Benefits:
  • The amount of ODSs entering the environment is reduced.
  • Alternatives can provide a non-global warming agent or lower global warming potential.
  • Many alternatives are non-toxic and non-corrosive, as well as biodegradable.


Disadvantages:
  • Careful consideration of the choices is necessary to select the optimal alternative.
  • Higher concentration or greater quantity of the extinguishing may be required because some substitutes may not be as effective.
  • The Cold FireTM aerosol version is intended primarily for use on small, startup fires. The surfactant is propelled by compressed air. It is approved for Class A and B fires only. It contains water and is, therefore, not suitable for use on Class C (electrical fires).


Economic Analysis:

Use of pollution prevention funds for replacement of halon fire extinguishing systems with non-halon based systems is not authorized if the reason for conversion is that the existing system has reached the end of its life expectancy. The economic feasibility of each substitute is highly dependent on the application.

Assumptions:

  • Cost of 5 gal. pail of Cold Fire: $60.02.
  • Cost of 15 lbs. Halon 1211 fire extinguisher (NSN 6830-01-092-3263): $82.26.
  • Both fire suppression agents are used in equivalent amounts.
  • Shipping cost for used halon fire extinguisher is dependent upon size and origin of shipment. If the transportation cost exceeds $250, the Defense Supply Center Richmond will pay the cost.

Cost Comparison for Cold Fire vs. Halon 1211 Fire Extinguisher

 

Cold Fire Extinguisher

Halon 1211 Extinguisher

Capital and Installation Costs:

$60.02

$82.26

Operational Costs:

   

Shipping:

$0

$250

Total Costs:
(not including capital and installation costs)

$0

$250

Total Income:

$0

$250

Annual Benefit:

$0

-$250

Economic Analysis Summary:

  • Annual Savings for Cold Fire: $250
  • Capital Cost for Diversion Equipment/Process: $60.02
  • Payback Period for Investment in Equipment/Process: 0.2 years

Click Here to view an Active Spreadsheet for this Economic Analysis and Enter Your Own Values.
To return from the Active Spreadsheet, click the Back arrow on the Tool Bar.


NSN/MSDS:
Product NSN Unit Size Cost MSDS*
CO2 Fire Extinguisher 4210-01-364-1623 ea. 2.5 lb. $89.32  
CO2 Fire Extinguisher 4210-00-148-8551 ea. 3.5 lb. $898.38  
Dry Chem. Fire Ex. 4210-00-965-1115 ea. $32.51  
Cold Fire/Fire Supp. 4210-01-429-0703 12/12 oz $61.43  
Cold Fire/Fire Supp. 4210-01-429-0443 5 gal. ea. $60.02  

*There are multiple MSDSs for most NSNs. The MSDS (if shown) is only meant to serve as an example.
To return from the MSDS, click the Back arrow on the Tool Bar.


Approving Authority:

Appropriate authority for making process changes should always be sought and obtained prior to procuring or implementing any of the technology identified herein.


Points of Contact: For more information

Vendors:

This is not meant to be a complete list, as there may be other suppliers of this type of equipment.

FireFreeze Worldwide,Inc.
272 Route 46 East
Rockaway, NJ   07866
Phone: (973) 627-0722 
FAX: (973) 627-2982
URL: http://www.firefreeze.com
Service: Manufacturers of Cold Fire


Sources:

http://www.epa.gov/ozone/snap/fact.html


[