Adhesives Technology Review
Appendix E

GENERAL BIBLIOGRAPHY and ACKNOWLEDGEMENTS

"Adhesives Manufacture, Source Reduction for Chlorinated Solvents," Source Reduction Research Partnership, June 1991.

"Demand for PS Products to Reach $14 Billion," Adhesives Age, p. 38, December 1997.

"Environmental Advantages Drive Demand for Radiation Cured Products," Adhesives Age, p. 51, October 1997.

"Photo Curable Adhesives: 10 Tips for Best Performance," Adhesives Age, p. 67, November 1997.

"Pollution Prevention Assessment for a Manufacturer of Pressure-Sensitive Adhesive Tape," National Risk Management Research Laboratory, Cincinnati, Environmental Protection Agency, August 1995, ISBN: EPA/600/S-95/023.

"Reducing VOCs with Water-borne PSAs," Converting Magazine, February 1992, pp. 27-28.

"Source Reduction and Recycling of Halogenated Solvents in the Adhesive Industry," Technical Support Document, Pasadena, California, Jacobs Engineering Group, Inc.

"US Adhesives Demand to Reach 14 Billion lbs. by 2001," Adhesives Age, p. 38, September 1997.

Berejka, Anthony, "Reengineering PSA Manufacture for VOC Reduction and Energy Savings," Adhesives Age, p. 28, September 1997.

Crystal Cabinet Works, Inc., "Good Neighbor Agreement," Princeton, Minnesota, November 1997.

Dymax Corporation, Application Case History, "Tweeter Manufacturer Improves Process, Reaps Added Bonus of Higher Quality & Performance," http://www.dymax.com/Ach20181.htm.

Dymax Corporation, August 07, 1997 information regarding adhesives for glass, optical and fiber optic assembly, http://www.dymax.com/glasspag.htm.

Glotgeltor, Craig, "Tg Region Breadth is Critical to UV Curable PSA Performance," Adhesives Age, p. 29, December 1997.

Gray, Dennis, "Product Assembly with PUR Adhesives," Adhesives Age, p. 22, October 1997.

Hoffman, William and Miles, David E., "UV Light-Cured PSAs Provide Application Alternatives," Adhesives Age, April 1992, pp. 20-24. Huang, Eddy, "Assessment of Pollution Prevention Opportunities of Five Industries," Research Triangle Park, Environmental Protection Agency, March 1995.

Hughes, Frank, Nordson Corporation, "New Polyurethane Reactive Hot Melt Applications: Growing the Hot Melt Marketplace," 1997 Hot Melt Symposium, TAPPI Proceedings, 1997.

Loven, William E., "Structural Bonding of Thermoplastics and Composites," Adhesives Age, p. 22, December 1997.

McMinn, Beth W, Snow, W. Scott, and Bowman, Dan T., "Solvent-Based to Waterborne Adhesive-Coated Substrate Retrofit, Volume I: Comparative Analysis," National Risk Management Research Laboratory, Research Triangle Park, EPA-600/R-95-011a, April 1996.

McMinn, Beth W, Snow, W. Scott, and Bowman, Dan T., "Solvent-Based to Waterborne Adhesive-Coated Substrate Retrofit, Volume III: Label Manufacturing Case Study: Nashua Corporation," National Risk Management Research Laboratory, Research Triangle Park, EPA-600/R-95-011c, December 1995.

McMinn, Beth W, Snow, W. Scott, and Bowman, Dan T., "Solvent-Based to Waterborne Adhesive-Coated Substrate Retrofit, Volume IV: Film and Label Manufacturing Case Study: FLEXcon Company, Incorporated," National Risk Management Research Laboratory, Research Triangle Park, EPA-600/R-95-011d, December 1995.

Miller, Richard A. and Althen, Gregg, "Water Dispersible Hot Melt Adhesive Formulations," Adhesives Age, p. 64, November 1997.

Morton International, product descriptions of adhesives for the packaging industry, http://www.mortonintl.com/chem/pckg/overpckg.htm.

Morton International, product descriptions of rubber-to-metal adhesives, http://www.mortonintl.com/chem/radh/overradh.htm.

National Starch and Chemical Company, February 25, 1998 information regarding BONDMASTER® 40-0631 adhesive, http://www.nationalstarch.com/americas/usa/new_products/98_072.htm.

National Starch and Chemical Company, November 29, 1994 product description of BONDMASTER® 40-0625 adhesive, http://www.nationalstarch.com/americas/usa/national/auto/tsbs/40-0625.html.

Sheldahl, Inc., "Methylene Chloride Replacement with Environmentally Safer Solvents in Thermoset Adhesive Systems using Hot Coating Technique," Northfield, Minnesota, Sheldahl, September 15, 1992.

Shell Chemical Company Advertisement, Adhesives Age, p. 5, December 1997.

Sony Chemicals Advertisement, Adhesives Age, p. 10, December 1997.

W. F. Taylor Co. Inc., W. F. Taylor Online, Description of 2093 Rubber Flooring Adhesive, http://www.wftaylor.com/2093.htm.

W. F. Taylor Co. Inc., W. F. Taylor Online, http://www.wftaylor.com.

Watson, Chris, Geometric, "Hot Melt Coating Methods: The More They Change, the More They Stay the Same," 1996 Hot Melt Symposium, TAPPI Proceedings, 1996.

Widorsky, Robert and Thomas Batorski, Pierce & Stevens Corp, "Improved Extrudable Hot-Melt Adhesive for Lidding," Executive Summaries for August 1997 Reviewed Papers, TAPPI Journal, Volume 80 , No. 8. August 1997. http://www.tappi.org/publicat/journal/1997/aug%2Dexec.htm#BURKE.

Young, John, Ambrose, Linda, and Lobo, Lois, "Stirring Up Innovation: Environmental Improvements in Paints and Adhesives," New York, INFORM, 1994.

Zechman, Bradley, National Starch and Chemical, Co., "High-Value Adhesives for a Low-Cost Process," Executive Summaries for August 1997 Reviewed Papers, TAPPI Journal, Volume 80, No. 8, August 1997, http://www.tappi.org/publicat/journal/1997/aug%2Dexec.htm#BURKE.

ACKNOWLEDGEMENTS

The Pacific Northwest Pollution Prevention Resource Center is indebted to the following individuals for their time and careful review of this document:

Ann Barker, Adhesives Age
Randy Cook, MNTAP - University of Minnesota
Maggie Corbin, Puget Sound Clean Air Agency (formerly the Puget Sound Air Pollution Control Agency)
Angela Ewald, Crystal Cabinet Works, Inc.
Mary Ellen Flanagan, University of Washington
Jennifer Griffith, Northeast Waste Management Officials Association (NEWMOA)
Judy Kennedy, Washington Department of Ecology
Scott Lytle, Alaska Department of Environmental Conservation
Deb Snoonian, Environmental Technology Evaluation Center
Chester Vogel, United State Environmental Protection Agency
Rick Volpel, Oregon Department of Environmental Quality.

Also instrumental in preparing and writing the hot melt, radiant-cured and waterbased adhesive reports was J. Christopher Montovino.

Continue on to the Appendix F page of the Adhesives Technology Reviews.

Return to the introduction of the Hot Melt Adhesives Technology Review.

Return to the introduction of the Radiant-Cured Adhesives Technology Review.

Return to the introduction of the Waterbased Adhesives Technology Review..